Networking
Tap Photodiodes (Tap PDs)
Enable network traffic monitoring by Integrating these taps within standard transceiver packages (e.g., CFP2) thanks to the small (1.8 or 1.4 mm) diameter format.
Our slim taps feature high optical efficiency and low-noise photodiodes optimized for C- or L-band use. Choose from standard tap ratios (1, 2, 5, 10, or 20%) or specify a custom ratio. They feature rugged operation over the temp. range 0-75°C and humidity to 85% RH.
1.8 mm and 1.4 mm Tap PDs
Use the table below to determine the optimum standard tap ratios for your application, or specify a custom ratio.
Tap Ratio (%) |
Responsivity (A/W) |
Insertion Loss (dB)
|
|
Min. |
Typ. |
||
1 |
0.008 |
0.02 |
0.45 |
2 |
0.014 |
0.025 |
0.65 |
5 |
0.040 |
0.070 |
1.2 |
10 |
0.080 |
0.14 |
1.85 |
20 |
0.120 |
0.28 |
2.0 |
Related Products
Featured Blog
SiC Circuitry Makes EVs Better
Coherent is one of the few companies worldwide with a complete, vertically integrated SiC manufacturing capability. We produce SiC wafers and epitaxy, all the way through power devices and modules. Furthermore, the unmatched quality with which we can produce SiC material makes Coherent virtually the only supplier positioned to successfully transition from the current standard wafer diameter of 150 mm up to 200 mm.
Featured Success Story
Augsburg University: Excimer Laser Optics Facilitate Fluence Control
A team led by Prof Helmut Karl at Augsburg University chooses a COMPex laser and bespoke PLD beam optics for quantitative ablation studies of single-crystalline targets.
